3E Series 3036E FARM TRACTOR Versatility on deep paddy, wet land or dry land Ergonomically designed Fuel efficient Dealer ...
5715
5715
- 90 Hp Engine with four-wheel drive
- 9F/3R transmission
- Open operator System
JD RMA จอห์นเดียร์ไทย
KEY SPECIFICATIONS | |
---|---|
Engine John Deere PowerTech 4 Cyclinder Engine, 2100RPM | John Deere PowerTech 4 Cyclinder Engine, 2100RPM |
Horsepower | 89 hp (66.4kW) |
Transmission | 9F, 3R Collar Shift |
ENGINE | |
Type (Tier 0) | 4045TP066 |
Aspiration (Tier 0) | Turbocharged |
Engine Power @ 2400 rpm (Tier 0) | 89 hp (66.4 kW) |
PTO Power @ 2400 rpm (Tier 0) | 77 hp (57.4 kW) |
Maximum Torque (Tier 0) | 317 N.m |
Cylinders | 4 |
Displacement | 4.5 L (278 cu .in3) |
Compression ratio (Tier 0) | 17.0:1 |
Bore and Stroke | 106.5 x 127 mm (4.19 x 5.00 in.) |
TRANSMISSION | |
Standard | Standard – Top shaft Syncronized 9F/3R Sychronization – All Speeds 1st, 2nd & 4rd |
Auxiliary Brake | Parking Pawl |
CLUTCH | |
Type | Dry |
PTO | |
Type | Fully Independent, 540 rpm |
PTO Speed | 2400 rpm |
Size | 280 mm (11 in.) |
HYDRAULIC SYSTEM | |
Types | Open Center |
Pump | Tandem Gear |
Flow Rate | Steering – 24.9 L/min (6.6 gpm) Implement – 60.2 L/min (15.9 gpm) |
Hitch Load Capacity @ 610 mm behind hitch point | 1530 kg (3374 lb) |
Category | I & II |
Sensor | Draft Links with interchangable balls |
STEERING | |
Type | Hydrostatic |
BRAKES | |
Type | Hyraulically Activated Wet Disk |
ELECTRICAL SYSTEM | |
Type | 12V Negative Ground |
Battery | 12V Cold Cranking Ams 550 |
Alternator | 70 A |
CAPACITIES | |
Fuel Tank | Fuel Tank – 95 L (25 U.S. gal.) Front – 7.5 x 16.0 Front (Optional) – 10.0 x 16.0 Rear – 15.5 x 38 Rear (Optional) – 18.4 x 30 |
Engine Cooling System | Engine Cooling System – 10.8 L (11.4 U.S. qt) Front – 13.6 x 24 Front (Optional) – 12.4 x 24 Rear – 15.5 x 38 Rear (Optional) – 18.4 x 30 Rear (Optional) – 18.4 x 30 (casting hub) |
Crankcase (including filter) | 8.5 L (9 U.S. qt.) |
Transmission/Hydraulic System (MFWD) | 41.8 L (11 U.S. gal.) |
DIMENSIONS | |
Wheelbase | 2180 mm (85.8 in) |
Total length (including draft arms) | 3570 mm (140.5 in.) |
Overall width (oustide edge of tires) | 2100 mm (82.6 in.) |
Front axle crop clearance | 420 mm (16.5 in.) |
Height to top of drawbar | 513 mm (20.1 in.) |
Estimated shipping weight | 2687 kg (5923.9 lb) |
TIRES | |
Standard front tires | Standard front tires – 13.6 x 24 8PR R1 Optional front tires – 11.2 x 24 8PR R1 Optional front tires – 12.4 x 24 8PR R1 |
Standard rear tires | OPtional rear tires – 16.9 x 30 6PR R1 Optional rear tires – 18.4 x 30 8PR R1 Optional rear tires – 18.4 x 30 10PR R2 |
BASIC EQUIPMENT | |
Water bowl separator | 0 |
Seat belt | 0 |
Rops | 0 |
One selective control valve | 0 |
Foot throttle | 0 |
SMV Emblem | 0 |
Two front and one rear working lights | 0 |
Rear brake lights | 0 |
7 Pin connector | 0 |
Front weight support | 0 |
Operators manual | 0 |
OPTIONAL EQUIPMENT | |
Front fenders (MFWD) | 0 |
Toolbox | 0 |
Deluxe canopy | 0 |
2nd Rear Selective Control Valve | 0 |
2 Function Joystic with mid valve | 0 |
Seat armrest | 0 |
Horn | 0 |
• FB1121
• DP3203
• DP5403
• DP5404
• DH7305
• DH7406
• DH7407
• SP3130
• SP3140