3E Series รถแทรกเตอร ...
3E Series
รถแทรกเตอร์จอห์น เดียร์ ล้อแคบ รุ่น 3028EN 28 แรงม้า [28 HP, 2800 RPM]
รถแทรกเตอร์จอห์น เดียร์รุ่น 3028EN รถแทรกเตอร์ล้อแคบขนาด 28 แรงม้า ถูกออกแบบให้มีรูปทรงกระทัดรัดสามารถลุยระหว่างร่องปลูกได้อย่างคล่องแคล่ว เข้าถึงพื้นที่ได้มากกว่า ทำงานได้อย่างฉับไวด้วยเครื่องยนต์ ขนาด 28 แรงม้า แรงและประหยัด พร้อมด้วยระบบส่งกำลังที่ทนทานพร้อมลุยงานสมบุกสมบัน พร้อมสำหรับงานปั่นพรวนดิน สางใบอ้อยเพื่อเก็บเกี่ยว งานกำจัดวัชพืช และงานบำรุงรักษาไร่อ้อยตลอดฤดูกาล
John Deere 3028EN tractor is designed to be compact, able to wade between planting grooves fluently. With a width of only 0.995 meters, can work quickly with a 28 horsepower engine, powerful and economical. Can lift implement up to 910 kg.
KEY SPECIFICATIONS | |
| Engine Type | 3 Cylinder, 2800 Rated, 1.33 L., 87 Nm,Coolant Cooled |
| Gross rated Engine power @ rated rpm, HP | 28 |
| PTO Speed | 540E/540std |
| Hyd Lift Capacity, Kg @ balls | 910 |
ENGINE | |
| Engine Type | 3 Cylinder, 2800 Rated, 1.33 L., 87 Nm,Coolant Cooled |
| Aspiration | Natural |
| No. of Cylinders | No. of Cylinders |
| Appx. Displacement | 1.33 Litre |
| Rated Engine RPM | 2800 |
| Gross rated Engine power @ rated rpm, HP | 28 |
| PTO HP @ Rated RPM | 27.5 |
| Fuel Injection Pump | Inline |
| Engine shut off | Electrical shut off |
ENGINE AUXILIARY | |
| Air cleaner, type | Dry with safety element |
| Antifreeze | 50:50:00 |
| Hand and Foot Throttle | Mechanical |
| Fan finger guard | Yes |
| NSS | Yes |
| Fuel Tank Capacity (Filled), Litres, Standard | 32L |
CLUTCH | |
| Type | Single Dry Traction Clutch |
TRANSMISSION | |
| Gear Box Type | Sync reverser for Forward and Reverse & Constant mesh in speed & range |
| No. of Forward Speeds | 8 |
| No. of Reverse Speeds | 8 |
| Rear Tyre | 8.3 x 24 for 995 mm. of total width and 9.5 x 24 for 1106 mm. of total width |
| Speed Forward | 1.6 to 19.5 kph |
| Speed Reverse | 1.7 to 20.3 kph |
| Forward Reverse Synchro | LH reversere mounted below steering wheel |
| Gear shift pattern | H – Type |
REAR AXLE | |
| Type | Oiled |
| Final Drive Type | Bull Gear Reduction |
| Differential Controls | Mechanical |
| Sealings | Metal face sealing |
PTO | |
| PTO Speed | 540E/540std |
BRAKE | |
| Type | Wet Disc Brakes |
| Actuation | Mechanically actuated |
ROCKSHAFT | |
| Type | Open Center |
| Pump Output, L / Min @ Rated | 19.1 |
| Steering L/Min | 13.6 |
| Hyd Lift Capacity, Kg @ balls | 910 |
HYDRAULICS | |
| Category | CAT – I |
HITCH AND DRAWBAR | |
| 3 point hitch | Fixed Drawbar |
OPERATOR STATION | |
| Clutch pedal | Mechanical Linkage on LH Side |
| Brake Pedal | LH & RH Brake pedal with Mechanical Linkage on RH Side |
| Differential lock pedal | Mechanical engagement at RH floor |
| Steering | Fixed Column, Hydraulic Steering |
| ROPS | Foldable with retractable Seat belt as standard |
OVER ALL DIMENSIONS | |
| Total Weight | 1070 kg |
| Wheel Base | 1574 mm |
| Overall length | 2520 mm |
| Overall width | 995 mm. for 8.3 x 24 of rear tyre and 1106 mm. for 9.5 x 24 of rear tyre |
| Overall Height (with ROPS) | 2320 mm |
| Ground clearance | 285 mm. for 8.3 x 24 of rear tyre and 310 mm. for 9.5 x 24 of rear tyre |
| Turning radius with brake / without brake | 2300 mm/3000 mm |
| Track width front | 902 mm. for 5 x 12 of front tyre and 948 mm. for 6 x 14 of rear tyre |
| Track width rear | 846 mm. for 8.3 x 24 of rear tyre and 856 mm. for 9.5 x 24 of rear tyre |
FRONT AXLE, WHEEL & TYRES | |
| Front axle | MFWD |
| Front Tyre | 5 x 12, 6 x 14 |
| Rear tyre | 8.3 x 24, 9.5 x 24 |
ELECTRICAL | |
| 7 Pin connector | Yes |
| Alternator | 12V, 43Amp |
| Starter | 12V, 1.2kW |
| Head lamp | High & Low Beam(60/55W) |
| Rear work lamp | 12V, 55W |
| Park lamp & tail lamp | Yes |
| Safety switch | NSS at PTO, Gear |
| Instrument Cluster | Analogue |
| Horn | Yes |
OPERATOR MANUAL | |
| Languages | Thai/English |
MISCELLANEOUS | |
| Weight | Yes |
| Draw bar | Yes |
| Roll over protection structure (ROPS) | Yes |
| Retractable seat belt | Yes |
RT4409
Function:
GREENSYSTEM Rotary Tiller is designed by engineer for the proper working width and E-RPM to compatible with each John Deere tractor model For pulverization and weeding in sugarcane furrow and field in narrow furrow.
Benefits:
- Big housing – better heat transfer for longer working hour
- Special thickness blade for longer service life
- Big PTO rotor for strength, durable, longer service life
- Big blade rotor, proper blade position and angle to reduce load
- Big chain in side drive for longer service life
- C blade suitable for pulverization and weeding in furrow
Advantages:
- Designed by engineer, produce and test by expert.
- Strong structure for more durable Automatic chain adjustment in side drive
- PTO guard for user safety
- RPM is proper designed matching to John Deere tractor to optimize efficiency and fuel consumption
- High quality painting for beauty and strength
